Coin or Token Timer TA1cw for 1 shower or water supply
12Vdc version 1. 3 Amp
It provides a 12Vdc output for direct activation of a solenoid valve.
The time of service (closing of the relay) can be easily adjusted from 15 seconds to 6 hours for each coin/token inserted.
Upon inserting a coin it is possible to delay the start of service from 0 to 60 seconds, so as to save water prior to using the service.
It is possible to activate the signal "end of water notice" which causes the flow of water to be interrupted for 2 to 60 seconds prior to the end of service. It is useful for alerting the customer to the remaining time available and allowing them to finish bathing.
A signal light (LED) on the front of the Acceptor indicates when the service is in use.
The counting time is memorized in case power supply is interrupted and will automatically resume when power is restored. This prevents the time from being reset when brief interruptions occur and from any ensuing complaints.
Coins inserted when the TA1w is not in service will be rejected and returned, thereby preventing disputes from customers.
The CT1w uses an electronic comparable coin Acceptor which is easily programmable to accept any type of coin or token. Simply place a sample coin or token in the appropriate slot of the Acceptor and the coin/token will serve as a reference for all other coins/tokens inserted. It is easy then to change the type of coin that the TA1w will accept.
A special internal button (LOAD ON/OFF) allows for the manual activation/deactivation of the service to facilitate the proper functioning of the device.
Optional accumulation of time feature. If this feature is activated, inserting more coins will increase the time of service (maximum 30 hours). If deactivated, coins inserted during service will be rejected and returned, thereby preventing disputes from customers.
Sturdy metal container, with high resistant coating for outdoors (cataphoresis and powder). International protection rating IP30.
Large coin drawer that can hold circa 500 coins/tokens.
Size and weight: height 26 cm, width 22.5 cm, length 14 cm, weight 3.5kg.
The small dimensions of the article reduce bulkiness and make it more aesthetically pleasing.
