Speed Controller Series GS 24S/10-360B
Speed Controller Series GS 24S/10-360B
The GS 24S/xx-360 series transistor speed controller is a cost-effective compact unit with dimensions of 72 x 100 mm, designed for the infinitely variable speed control of DC motors in the low-voltage range with motor currents up to 10 A.
The input voltage range is 12 to 36 V DC, allowing direct battery operation. Continuous speed adjustment can be performed either via an internal or external potentiometer (10 kΩ) or through an external control voltage of 0 to 10 V DC (setpoint source selectable via jumper).
For overload protection, the motor current can be continuously limited using an internal potentiometer. By using the optional EPH 393 expansion board, motor direction reversal via relays can be implemented at any time. Selection of clockwise/counterclockwise rotation is carried out via a 12 to 48 V DC control signal while the motor is at standstill.
Features
High switching frequency of 18 kHz for low-noise operation
Form factor F > 1.05, resulting in low motor heating and high torque reserves
Speed control via 0–10 V interface or potentiometer (10 kΩ), internal or external
Enable input for activating the output stage, selectable as internal or external via RF jumper
Adjustable current limiting for overload protection of motors and gearboxes
Load-Dependent Transistor DC Speed Controller
Adjustable current limiting via potentiometer
Internal/external setpoint selection via jumper
Rated current: 10 A
Equipped with 9-pole screw terminal block
Supply voltage: 12 to 36 V DC