Redemption Ticket Eater Galileo EVO Twin
After 15 years of success and the installation of thousands of devices all over the world, the GALILEO Ticket Eater has EVO in a 2-users version. The equipment consists in two completely separated functioning: it means that if, for any reason, one-side has problems, the other side works properly. Regarding mechanics and electronics, they are the same as the already bied-and-tested GALILEO PRO, but the cabinet now is a •center-han• of brand new design with multicolor LED lights, wall completely in transparent plexi-glass and aluminum profiled frame specially designed. Obviously, there is the maximum choice of extemal customization with logos, instructions, etc. in many languages; even the writings into the display, sounds and vocal information can be programmed in different languages like Turkish, Arab, Russian, etc.
The GALILEO "PRO" Ticket Eater counts the tickets and highlights them in a big alphanumeric display, releases a paper receipt with the sum of the points printed also in a 16-digit barcode. Besides, on the same receipt are indicated date, hour, serial number and location's logo.
The GALILEO "PRO" has an "universal sensor" that can count the tickets using the holes or the barcode printed on them. The mother board memorizes 3 different barcodes. Each barcode can be setup with s multiples value or multi divide value.
In the "holes operation mode" there is an "antifraud" setup.
The mechanic and electric parts are assembled in a drawer, for an easy inspection and service of them. lt's possible to interface it with the major debit card system.
The alphanumeric display - dimensions: 24 x 5 cm - contains (default), a standard message that informs the Customer about how to use the Ticket Eater.
The other 32 characters, inside the display, can be used by the Operator to insert an advertising message at his choice, that can be composed using the buttons presents on the GALILEO "PRO" mother board or an external computer. The messages can be written in any languages, included Cyrillic.
The Ticket Eater setup can be made using the service buttons situated on the usually have problems to find space to place the Galileo PRO, but they mother board, reading the parameters into the service display, fixed on the same board
The GALILEO "PRO" Ticket Eater is patented both in the ticket introduction mode (2 special rubber cylinders that spin in the opposite direction) and in the ticket cutting (obtained thanks to two helical self-sharpening blades)
The counting speed is 640 tickets per minute and the collector sack has a capacity of 90.000 tickets. The dimensions are 50 x 40 x 176 cm. The thermal printer is high-speed, with built-in cutter
The graphical front panels can be personalized according to Customer's needs, both regarding colors and instructions for use.
In addition to the "stand-alone'' operation, like shown above, the GALILEO "PRO" Ticket Eater has also a magnetic card reader, that allows a major Customer's loyalty. In fact the points relatives to the tickets counted are collected in a card with magnetic strip that contains the Customer's identification code; on the colored side of the card are printed the Arcade's logo, the address, Prizes' Operation's name, etc. The use of the loyalty card involves necessarily the physical link, or via wireless devices, to the Management Kit, that contains the Customers' data-base, stock prizes, etc.; this kit allows also to speed and secure all the operations related to the use of Ticket Redemption.
For a major security in using the loya/ty card, on its back is printed also an univocal barcode that gives a double identification of the Customer, in case of demagnetization of the magnetic code.
Technical parameters:
Supply voltage: 230 VAC 50 Hz
Power consumption: 250 Volt
Counting speed 640 tickets/min
Sack capacity: ~ 90.000 tickets
2 Printer Custom TPTCM60 Thermal printer with auto-cutter and automatic ejector ~ 2.400 receipts
2 Badge reader: 3 ISO tracks
2 External display: graphical dot-matrix 48*8 Dimensions: 24 x 5 cm
Service display: Alphanumeric 16*2 characters Dimensions: 6,5 x 2 cm
Pc interface: Rs232 serial, 9600 bps
2Mechanical assembly: Patented "GALILEO" model Single-phase motor 230 VAC/0.6A Reducer in oil bath Helical self-sharpening blades
Dimension:
Height: 183 cm
Width: 65 cm
Depth: 65 cm
Weight (without tcikets): 90 kg